Cyclic climatic chamber

CB-CS PRO Series

Temperature data
Temperature range [°C] CB PRO Series-25/+70
Temperature range [°C] CS PRO Series0/+70
Temperature fluctuation [± K]±0.1
Humidity data
Humidity range [% RH]10 to 98
Humidity fluctuation≤ 3 ± % RH
Controller data
ControllerCyclic Programmer/Controller
Program1
Step20
Construction and Insulation data
Exterior and interior structureWhite plastic coated galvanized steel or Stainless steel AISI 304
InsulationCFC and HCFC free
DoorReversible self closing door with magnetic gaskets plug
Shelf grillRemovable and height adjustable plastic-coated steel
Allarm and security data
AllarmAudio-visual
Allarm parameterHot temperature
Remote connection
Security deviceSafety device with manual reset class 1 (DIN 12880)
ModelC140B PROC370B PROC440B PROC600B PROC700B PROC900B PROC1200B PROC1500B PROC2300B PRO
Temperature
Temperature range [°C]-25/+70-25/+70-25/+70-25/+70-25/+70-25/+70-25/+70-25/+70-25/+70
ModelC140S PROC370S PROC440S PROC600S PROC700S PROC900S PROC1200S PROC1500S PROC2300S PRO
Temperature
Temperature range [°C]0/+700/+700/+700/+700/+700/+700/+700/+700/+70
Temperature variation [± K]111111111
Temperature fluctuation [± K]0.10.10.10.10.10.10.10.10.1
Dimension data
Net Interior volume [L] 130310370450530810102011801830
Net weight of the unit [kg] 708095110160165205245360
Interior Dimension
Width [mm] 4505005006006001100132013202070
Depth [mm] 535480580570670580570670670
Height [mm]52012501250135013501250135013501350
Exterior Dimension
Width [mm]5306006007507501200150015002250
Depth [mm]800760860860980860860980980
Height [mm]94019201920210021001920210021002100
Shelf Dimension
Width [mm]400460460530530460530530530
Depth [mm]500470570550650570550650650
Main Door
Number of Door111112223
Interior Shelf
Number of Shelf233336669
Electrical data
Energy consumption at 37 °C [kWh/h]1.551.651.922.082.182.533.684.224.30
Rated Voltage [V ]220/240220/240220/240220/240220/240220/240220/240220/240220/240
Power Frequency [Hz]505050505050505050
Nominal Power [kW]1.61.61.61.61.61.61.61.61.6
Unit Fuse [A]161616161616161616
Phase (Nominal voltage)1~1~1~1~1~1~1~1~1~
CategoryTitleFile typeDownload
DatasheetCB-CS PRO SeriesPDFDownload
PRO Touch controllerPROPDFDownload
OptionsOptionsPDFDownload

For any further technical or sales information please do not hesitate to contact us

Need quickly help? Save time by starting your support request online

Need help for configure your climate chamber? click here

More PRO Touch controller specifications here

Climatic cycling chambers for temperature and humidity testing

Climatic chambers for environmental research quickly help users achieving all temperature and humidity testing requirements. The cycling climate chamber, manufactured by FDM, provides accurate results for testing in laboratories where products development and materials testing are performed.

The cycling test chamber series is ideal for semiconductor IC devices with varied kinds of electronic and non-electronic components and other applications such as assemblies, concrete, cement, textiles, beauty products and many more.

Climate chamber for environmental testing

The FDM climate chamber is equipped with a programmer. It reproduces the test according to the cycles set by the operator. It also monitors the parameters of temperature and humidity so to create the appropriate test environment.

The chamber also acts as a thermal cycling chamber: the dynamic conditions are, for the CB series, from -25° C to + 70° C, while for the CS series from 0° C to + 70° C.

The ventilation system of the cyclic climatic chamber offers high air flow performances. It provides the right temperature and humidity level for the entire duration of the operation.

The standard development rate of the temperature is approximately 0.1° C; this guarantees a stable temperature fluctuation.

Chambers for thermal cycles are equipped with highly sophisticated sensors, that simulate real conditions for the test. In fact they detect the temperature with a deviation of about 0.1° C.

 

Features of the revoFACE programmer

RevoFACE programmer; with the touch programmer it is possible to perform an infinite number of tests. It is standard equipped with 1 program and 20 segments, but optionally it is possible to implement it up to 50 programs and 200 segments.

 

Control humidity – Main features

The humidity sensor of the FDM cycling test chamber for thermal and climatic tests uses a technologically advanced module, that provides a constant and precise sampling of the values. Humidity has a range of 10-98% with a deviation of ≤ 3 ±% RH

Need quickly help? Save time by starting your support request online

Product Inquiry

Your request*

First name

Last name

Your email*

Company / Organization*

Country*

Your message*

* I have read and accept the Privacy policy.
I would like to receive announcements, recommendations, and updates about services, software and FDM products.



(*) Required fields